Description
| A | CW96 | Hubless adapter 1 in. bore, 5.500 in. (2) | Q | W133 | Bearing adapter 1 in. bore, 1.659 in. to 2.033 in. |
| B | W115 | Hubless adapter 1 in. bore 4.750 in. | R | W221 | Wrench 1 in. Rajesh, 2.00 in. to 3.125 in. |
| C | W114 | Hubless adapter 1 in. bore 4.000 in. | S | W118 | Bearing adapter 1 in. bore, 1.285 in. to 1.659 in. (2) adapter 1 in. bore to 4.000 in. |
| D | W108 | Spring | T | W224 | Self-Aligning Spacer |
| E | BDL140 | Chatter band, Drum | U | W223 | Self-Aligning Spacer |
| F | BDL251-1 | Lamp | V | W230 | Wrench 3/4 in. |
| G | W110 | Cone 1 in. bore, 3.00 in. to 4.00 in. | W | CL503A | Disc Stabilizer Assembly |
| H | W111 | Cone 1 in. bore, 2.00 in. to 3.125 in. | X | W116 | Chatterband 9 3/4 in. |
| I | CW94 | Cone 1 in. bore, 1.150 in. to 2.350 in. | Y | W131 | Chatterband 7 in. |
| J | W101 | Spacer 1 in. bore, 2.00 in. Long (2) | Z | W117 | Chatterband 10 3/4 in. |
| K | W099 | Spacer 1 in. bore, 1.00 in. long | AA | CL538 | Mounting Shaft 10.5 in. |
| L | W098 | Spacer 1 in. bore, 1/2 in. long | BB | CL502A | Boring Bar Assembly (includes item DD) |
| M | W220 | Lock nut, left | CC | W140 | Tool Holder (2) – (included in item N) |
| N | CL605A | Tool Plate Assembly (includes item CC) | DD | W140-1 | Tool Holder (drum) – (included in item BB) |
| O | W129 | Bearing adapter 1 in. bore, 2.047 in. to 2.781 in. | EE | W231 | Safety Glasses |
| P | W119 | Bearing adapter 1 in. bore, 2.033 in.to 2.407 in. | FF | W232 | Brush |
Brake Lathe Specifications
| Drive Motor | 1 Horsepower, 1725/1425 RPM |
| Drum/Rotor Feed Motor | 2 Gear Motors (1 for Each Tool Carriage) |
| Arbor Speeds | 85-115-140-185 RPM @ 60HZ, 115 Volts |
| Drum/Rotor Carriage Feed-Variable |
Drum: 0.001″ – 0.012″ per rev (0 025 – 0.300mm) Rotor: 0.001″ – 0.010″ per rev (0.025 – 0.250mm) |
| Drum Diameter | 5 in. to 30 in. (127-762 mm) |
| Drum Facing Travel | 9 in. (229 mm) |
| Rotor/Flywheel Diameter Range | 5 in. to 30 in. (127-762mm) |
| Rotor/Flywheel Facing Travel | 5 in. (127mm) |
| Arbor Type-Standard | 1 in. Diameter |
| Power Requirement | 115V, 1-PH, 50/60Hz, 12.6/14.4 Amp |
